Search

Start Over Subject milky way disk
1. A 24 and 70 Micron Survey of the Inner Galactic Disk with MIPS
ID:
ivo://irsa.ipac/Spitzer/Images/MIPSGAL
Title:
A 24 and 70 Micron Survey of the Inner Galactic Disk with MIPS
Short Name:
MIPSGAL
Date:
27 Oct 2022 19:00:00
Publisher:
NASA/IPAC Infrared Science Archive
Description:
MIPSGAL is a survey of the inner 248 square degrees of the Galactic plane at 24 and 70 microns using the MIPS instrument aboard the Spitzer Space Telescope. The survey covers Galactic latitudes of -1° < b < +1° for Galactic longitudes of l < 62° and l > 298°. Version 3.0 of the MIPSGAL data includes mosaics only at 24um, but covering the entire survey region. |b| < 1° is covered for -68° < l < 69°, and |b| < 3° is covered for -8° < l < 9°.
2. Bolocam Galactic Plane Survey
ID:
ivo://irsa.ipac/Bolocam_GPS/Images
Title:
Bolocam Galactic Plane Survey
Short Name:
BOLOCAM_GPS
Date:
27 Oct 2022 19:00:00
Publisher:
NASA/IPAC Infrared Science Archive
Description:
The Bolocam Galactic Plane Survey (BGPS) is a 1.1 mm continuum survey of the Galactic Plane made using Bolocam on the Caltech Submillimeter Observatory. Millimeter-wavelength thermal dust emission reveals the repositories of the densest molecular gas, ranging in scale from cores to whole clouds. By pinpointing these regions, the connection of this gas to nascent and ongoing star formation may be explored. The BGPS coverage totals 170 square degrees (with 33" FWHM effective resolution). The survey is contiguous over the range -10.5 ≤ l ≤ 90.5, |b| ≤ 0.5. Towards the Cygnus X spiral arm, the coverage was flared to |b| ≤ 1.5 for 75.5 ≤ l ≤ 87.5. In addition, cross-cuts to |b| ≤ 1.5 were made at l = 3, 15, 30 and 31. The total area of this section is 133 square degrees. With the exception of the increase in latitude, no pre-selection criteria were applied to the coverage in this region. In addition to the contiguous region, four targeted regions in the outer Galaxy were observed: IC1396 (9 square degrees, 97.5 ≤ l ≤ 100.5, 2.25 ≤ l ≤ 5.25), a region towards the Perseus Arm (4 square degrees centered on l = 111, b=0 near NGC7538), W3/4/5 (18 square degrees, 132.5 ≤ l ≤ 138.5) and Gem OB1 (6 square degrees, 187.5 ≤ l ≤ 193.5). The survey has detected approximately 8,400 sources, to an rms noise level in the maps ranging from 30 to 60 mJy beam-1. The BGPS survey and catalog provide an important database for sub/millimeter observations with the Herschel Space Observatory, ALMA, SCUBA-2, APEX, and others.
3. Deep GLIMPSE Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLMDPArchive
Title:
Deep GLIMPSE Archive
Short Name:
GLMDPArchive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
Deep GLIMPSE is the sixth in a series of large area projects to map regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). Deep GLIMPSE is a Warm Mission Spitzer Cycle 8 Exploration Science Program (PIDs 80074 and 80253) that mapped 125 degrees of longitude of the Far Side of the Galaxy. Warm Mission Spitzer has two IRAC bands, centered at approximately 3.6 and 4.5 μm. The Galactic longitudes covered by Deep GLIMPSE are l=265◦-350◦and 25◦-65◦. The latitude width is about 2.1◦. The latitude center follows the Galactic warp at a Galactocentric distance of 13 kpc to survey the Far Outer Galaxy. The Deep GLIMPSE Archive (GLMDPA or the “Archive”) consists of point sources with less stringent selection critera than the Catalog. The information provided is in the same format as the Catalog. The Catalog is a subset of the Archive, but the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
4. Deep GLIMPSE Catalog
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLMDPCatalog
Title:
Deep GLIMPSE Catalog
Short Name:
GLMDPCatalog
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
Deep GLIMPSE is the sixth in a series of large area projects to map regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). Deep GLIMPSE is a Warm Mission Spitzer Cycle 8 Exploration Science Program (PIDs 80074 and 80253) that mapped 125 degrees of longitude of the Far Side of the Galaxy. Warm Mission Spitzer has two IRAC bands, centered at approximately 3.6 and 4.5 μm. The Galactic longitudes covered by Deep GLIMPSE are l=265◦-350◦and 25◦-65◦. The latitude width is about 2.1◦. The latitude center follows the Galactic warp at a Galactocentric distance of 13 kpc to survey the Far Outer Galaxy. The Deep GLIMPSE Catalog (GLMDPC, or the “Catalog”) consists of the highest reliability point sources. For each IRAC band the Catalog provides fluxes (with uncertainties), positions (with uncertainties), the areal density of local point sources, the local sky brightness, and a flag that provides information on source quality and known anomalies present in the data.
5. Galactic Legacy Infrared Midplane Survey Extraordinaire
ID:
ivo://irsa.ipac/Spitzer/Images/GLIMPSE
Title:
Galactic Legacy Infrared Midplane Survey Extraordinaire
Short Name:
GLIMPSE
Date:
24 Aug 2023 01:00:00
Publisher:
NASA/IPAC Infrared Science Archive
Description:
The Galactic Legacy Infrared Midplane Survey Extraordinaire (GLIMPSE) program covered the Galactic plane with the Spitzer IRAC instrument. GLIMPSEI covered 220 sq. degrees at |l|=10d-65d and b=-1d - +1d. GLIMPSEII covered the Galactic Center, l=-10d - +10d. GLIMPSE3D added vertical extensions, typically to |b|<+3d. GLIMPSE360 covered the outer Galaxy (l=65d-265d) with IRAC 3.6 micron and 4.5 micron imaging. The Vela-Carina program covered l=255d-295d.
6. GLIMPSE 360 Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM360Archive
Title:
GLIMPSE 360 Archive
Short Name:
GLM360Archive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE360 is a Warm Mission Spitzer Cycle 6 Exploration Science Program (PIDs 60020, 61070, 61071, 61072, 61073, 70072) that mapped 187 degrees of longitude of the Galactic plane that have not been mapped by previous Spitzer Galactic Plane surveys (GLIMPSE, GLIMPSEII, GALCEN, GLIMPSE3D, Vela Carina, SMOG and Cygnus-X). The specific Galactic longitudes covered by GLIMPSE360 are l=65◦-76◦, 82◦-102◦, and 109◦-265◦. The latitude range is about 2.8◦. The latitude center follows the Galactic warp. GLIMPSE360 completes the full circle of the Galactic plane. The GLIMPSE360 Archive (GLM360A or the “Archive”) consists of point sources with less stringent selection critera than the Catalog. The information provided is in the same format as the Catalog. The Catalog is a subset of the Archive, but the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
7. GLIMPSE 360 Catalog
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM360Catalog
Title:
GLIMPSE 360 Catalog
Short Name:
GLM360Catalog
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE360 is a Warm Mission Spitzer Cycle 6 Exploration Science Program (PIDs 60020, 61070, 61071, 61072, 61073, 70072) that mapped 187 degrees of longitude of the Galactic plane that have not been mapped by previous Spitzer Galactic Plane surveys (GLIMPSE, GLIMPSEII, GALCEN, GLIMPSE3D, Vela Carina, SMOG and Cygnus-X). The specific Galactic longitudes covered by GLIMPSE360 are l=65◦-76◦, 82◦-102◦, and 109◦-265◦. The latitude range is about 2.8◦. The latitude center follows the Galactic warp. GLIMPSE360 completes the full circle of the Galactic plane. The GLIMPSE360 Catalog (GLM360C, or the “Catalog”) consists of the highest reliability point sources. For each IRAC band the Catalog provides fluxes (with uncertainties), positions (with uncertainties), the areal density of local point sources, the local sky brightness, and a flag that provides information on source quality and known anomalies present in the data.
8. GLIMPSE 3D Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DArchive
Title:
GLIMPSE 3D Archive
Short Name:
GLM3DArchive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
9. GLIMPSE 3D Catalog
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DCatalog
Title:
GLIMPSE 3D Catalog
Short Name:
GLM3DCatalog
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
10. GLIMPSE 3D Epoch 2 Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DEp2Archive
Title:
GLIMPSE 3D Epoch 2 Archive
Short Name:
GLM3DEp2Archive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.

Limit your search

  • 225