Search

Start Over Subject milky way disk Resource Type Catalog
1. Deep GLIMPSE Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLMDPArchive
Title:
Deep GLIMPSE Archive
Short Name:
GLMDPArchive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
Deep GLIMPSE is the sixth in a series of large area projects to map regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). Deep GLIMPSE is a Warm Mission Spitzer Cycle 8 Exploration Science Program (PIDs 80074 and 80253) that mapped 125 degrees of longitude of the Far Side of the Galaxy. Warm Mission Spitzer has two IRAC bands, centered at approximately 3.6 and 4.5 μm. The Galactic longitudes covered by Deep GLIMPSE are l=265◦-350◦and 25◦-65◦. The latitude width is about 2.1◦. The latitude center follows the Galactic warp at a Galactocentric distance of 13 kpc to survey the Far Outer Galaxy. The Deep GLIMPSE Archive (GLMDPA or the “Archive”) consists of point sources with less stringent selection critera than the Catalog. The information provided is in the same format as the Catalog. The Catalog is a subset of the Archive, but the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
2. Deep GLIMPSE Catalog
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLMDPCatalog
Title:
Deep GLIMPSE Catalog
Short Name:
GLMDPCatalog
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
Deep GLIMPSE is the sixth in a series of large area projects to map regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). Deep GLIMPSE is a Warm Mission Spitzer Cycle 8 Exploration Science Program (PIDs 80074 and 80253) that mapped 125 degrees of longitude of the Far Side of the Galaxy. Warm Mission Spitzer has two IRAC bands, centered at approximately 3.6 and 4.5 μm. The Galactic longitudes covered by Deep GLIMPSE are l=265◦-350◦and 25◦-65◦. The latitude width is about 2.1◦. The latitude center follows the Galactic warp at a Galactocentric distance of 13 kpc to survey the Far Outer Galaxy. The Deep GLIMPSE Catalog (GLMDPC, or the “Catalog”) consists of the highest reliability point sources. For each IRAC band the Catalog provides fluxes (with uncertainties), positions (with uncertainties), the areal density of local point sources, the local sky brightness, and a flag that provides information on source quality and known anomalies present in the data.
3. GLIMPSE 360 Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM360Archive
Title:
GLIMPSE 360 Archive
Short Name:
GLM360Archive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE360 is a Warm Mission Spitzer Cycle 6 Exploration Science Program (PIDs 60020, 61070, 61071, 61072, 61073, 70072) that mapped 187 degrees of longitude of the Galactic plane that have not been mapped by previous Spitzer Galactic Plane surveys (GLIMPSE, GLIMPSEII, GALCEN, GLIMPSE3D, Vela Carina, SMOG and Cygnus-X). The specific Galactic longitudes covered by GLIMPSE360 are l=65◦-76◦, 82◦-102◦, and 109◦-265◦. The latitude range is about 2.8◦. The latitude center follows the Galactic warp. GLIMPSE360 completes the full circle of the Galactic plane. The GLIMPSE360 Archive (GLM360A or the “Archive”) consists of point sources with less stringent selection critera than the Catalog. The information provided is in the same format as the Catalog. The Catalog is a subset of the Archive, but the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
4. GLIMPSE 360 Catalog
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM360Catalog
Title:
GLIMPSE 360 Catalog
Short Name:
GLM360Catalog
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE360 is a Warm Mission Spitzer Cycle 6 Exploration Science Program (PIDs 60020, 61070, 61071, 61072, 61073, 70072) that mapped 187 degrees of longitude of the Galactic plane that have not been mapped by previous Spitzer Galactic Plane surveys (GLIMPSE, GLIMPSEII, GALCEN, GLIMPSE3D, Vela Carina, SMOG and Cygnus-X). The specific Galactic longitudes covered by GLIMPSE360 are l=65◦-76◦, 82◦-102◦, and 109◦-265◦. The latitude range is about 2.8◦. The latitude center follows the Galactic warp. GLIMPSE360 completes the full circle of the Galactic plane. The GLIMPSE360 Catalog (GLM360C, or the “Catalog”) consists of the highest reliability point sources. For each IRAC band the Catalog provides fluxes (with uncertainties), positions (with uncertainties), the areal density of local point sources, the local sky brightness, and a flag that provides information on source quality and known anomalies present in the data.
5. GLIMPSE 3D Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DArchive
Title:
GLIMPSE 3D Archive
Short Name:
GLM3DArchive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
6. GLIMPSE 3D Catalog
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DCatalog
Title:
GLIMPSE 3D Catalog
Short Name:
GLM3DCatalog
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
7. GLIMPSE 3D Epoch 1 Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DEp1Archive
Title:
GLIMPSE 3D Epoch 1 Archive
Short Name:
GLM3DEp1Archive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
8. GLIMPSE 3D Epoch 2 Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DEp2Archive
Title:
GLIMPSE 3D Epoch 2 Archive
Short Name:
GLM3DEp2Archive
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
9. GLIMPSE 3D Epoch 1 Catalog
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DEp1Catalog
Title:
GLIMPSE 3D Epoch 1 Catalog
Short Name:
GLM3DEp1Catalog
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.
10. GLIMPSE 3D Epoch 2 More Reliable Archive
ID:
ivo://irsa.ipac/Spitzer/Catalog/GLIMPSE/GLM3DEp2MRA
Title:
GLIMPSE 3D Epoch 2 More Reliable Archive
Short Name:
GLM3DEp2MRA
Date:
01 Oct 2018 20:27:17
Publisher:
NASA/IPAC Infrared Science Archive
Description:
GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellar The GLIMPSE3D More Reliable Archive (GLM3DMRA) consists of the higher reliability point sources than the Archive. It was produced for the single visit epoch 2 only source lists to provide a higher reliability source list than the Archive. No highly reliable Catalog is produced for this dataset since it requires a source be detected twice in one band. The sources in the More Reliable Archive have the same stringent criteria as the Catalog except two detections are not required in a single band. Two detections in adjacent bands are required (the “1” can include the 2MASS Ks band); for example one detection in band 1 and one detection in band 2.

Limit your search

  • 222